Printing labels from the Label Maker tool

Owned by Ruth Mills
Last updated: Jun 08, 2022 by Tünde Csabai (Deactivated)
2 min read

Introduction

One option available to users of the Label Maker tool is to print from the IndiCater application. This guide summarises how to print to your chosen label size.

Where to find this

There are different ways to access the Label Maker tool, the main 2 are:

1.From the main Dishes page, click on the label icon at the side of the page

2. In the Dish, click on the Label Maker option on the right:


Depending on permissions, Label Maker can also be accessed from the Menu Hub and from the Label Library. 


Assumptions

You have created your dishes and your suppliers have submitted ingredient information

You have set up your label template with the relevant settings

Step-by-Step guide

Once in the Label Maker page, you can complete your label set up. See the Help page for more info on how to do this:


If you select the Size of Label = Custom, the label will be sized according to the data you have selected to include.

If you select Fixed, it will give you the option to select a width, length and spacing size and will adjust the mock up on the right of the page.

Underneath the label mock up, select how many labels you want on a page and tick to include the outline or not when you print.

Please note the guidance around margins.

Save your changes and click the print preview when you are ready to print.

You may need to adjust your printer setting to select the correct size paper etc.


You can also use the Label Library once you have saved your label sizes where you can build a print queue of multiple dish labels to print.